The German tuner HS Motorsport has unveiled a new performance package for the Audi S5 Convertible.HS Motorsport is on the same page as was CarGraphic when they skipped over making any exterior modifications to the already exquisite ride. Instead, their focus was aimed at the engine’s output. This focus produced a total of 375hp (up from a total of 333 HP) and 525 NM of torque (up from 440 NM of torque). HS Motorsport also removed the top speed limiter so the S5 will now hit a top speed of 180mph (the standard model was able to hit a top speed of 155 mph).
Wheel discs at the front axle in 9×21 inch with 255/30ZR21 tyres and in 10,5×21 inch with 295/25ZR21 tyres at the rear axle are produced by Cargraphic also. Use of Bilstein thread suspension B16 PSS10 lowers the vehicle. Upon request a brake system from Brembo with double 380×32mm brake discs and six-piston monoblock saddles for the front axle can be installed.
On demand – and at this performance absolutely advisable – a brake system from Brembo with double 380×32 mm brake disks and 6-piston monoblock saddle for the front axle can be installed.
Source: HS Motorsport
Press ReleaseHS Motorsport - Audi S5 Cabrio ->The Perfectionized Perfection
The customers fairly expect over and over again something extraordinary from the HS Motorsport company from Eching, located near Munich, the more so the perfection for a valuable client is the highest precept for Bavaria’s tuner. This time Audi S5 must be exposed to intensive care of the team from Eching.
Strictly speaking, the external look of the cabriolet from Ingolstadt doesn’t need any upgrades. Therefore, the crew begins with the engine output increase which is not visible at first glance. This results in the fact that substantial 375 HP instead of standard 333 HP are now waiting for calling. The maximum torque shows 525 Nm in comparison to initial 440 Nm, which is now blasting the crankshaft without mercy. Increasing the limit of Vmax to the new value of 290 km/h is just a logical way at such performance.
Nevertheless, modifications are visible now! An exhaust silencer from Cargraphic with four round inclined rolled-in 89 mm exhaust pipes announces soon arrival of the Audi S5 Cabrio like a post-horn did in its time. At the present moment, there is only one version assigned for export. A tested version is being prepared for Germany.
Wheel disks at the front axle in 9x21 inch with 255/30ZR21 tyres and in 10,5x21 inch with 295/25ZR21 tyres at the rear axle are produced by Cargraphic also. Use of Bilstein thread suspension B16 PSS10 ensures perfect match of the wheel/tyre combination to the wheel housings.
On demand – and at this performance absolutely advisable – a brake system from Brembo with double 380x32 mm brake disks and 6-piston monoblock saddle for the front axle can be installed. In conclusion, various carbon parts for the external cover and also for the interior should be mentioned.